Accessory

Center bracket
The sprinkler head is connected to a reducer, which is a kind of pipe nipple, which is used to couple and fix the square bar with the reducer Types of center brackets are hook type, round type, cap type and one-touch type, which are different according to the size and convenience of the reducer.

Hook type bracket

It is widely used in the domestic reducer where the head joint part is long.

Low price and open type make it easy to use a small space

Cap type bracket

Mainly used for export, and when used for domestic use, the body of reducer must be over 31.4 pie.

Patented product of Daejin Industry. It is a product with excellent fasten ability and it is possible to tighten the bolt by hand.)

One-touch type bracket

It is mainly used for export, and the domestic conditions are the same as the cap bracket Because no tools are used at all and the time required to tighten is more than twice as fast, construction cost is reduced due to shorter construction period.

The worker can easily install it with the lever without the tool, and the performance is excellent and the disassembly is free. (Patented product)

One-touch New type bracket

It is mainly used for export, and the domestic conditions are the same as the cap bracket Because no tools are used at all and the time required to tighten is more than twice as fast, construction cost is reduced due to shorter construction period.

The worker can easily install it with the lever without the tool, and the performance is excellent and the disassembly is free. (Patented product)

  • CENTER BRACKET
End bracket
Used to connect anchor bars and square bars in ceiling structures

End 68mm (B-ES-B) for export

It is mainly used for export, and it is used for T bar (I bar). The bolt for securing the bar is fixed with an iron butterfly, so there is no need to use a tool. It can be used in less than 120mm

End 105mm (B-EL -B) for Export

It is mainly used for export, and it is used for T bar (I bar). It can be used in less than 140mm 3. End One-touch 68mm (B-EOT-S) for export It is mainly used for export, and it is used for T bar (I bar). When the anchor bar is tightened, the lever is pressed and fixed, so no tools are required. Can be used in less than 120mm

End one touch 68mm (B-EOT-S) For export

It is mainly used for export, and it is used for T bar (I bar). When the anchor bar is tightened, the lever is pressed and fixed, so no tools are required. It is easy to install, and the length of the reducer is less than 120mm.

End One-touch 105mm (B-EOT-L) for export

It is mainly used for export, and it is used for T bar (I bar). Easy to install and can be used in less than 140mm of length

End S (B-E1-B) Internal water

It is mainly used for domestic use, and anchor bar is used for M bar. Low cost, easy to install
  • END BRACKET
Square bar
The square bar is used to fix the end bracket of the anchor bar and the center bracket of the reducer. According to the length of the anchor bar, it is produced in customized sizes such as 650mm, 700mm, 1000mm, 1300mm and 1600mm, and the standard is 15mm * 15mm.
  • SQUARE BAR
Reducing Nipple
Reducer is a type of nipple for attaching a sprinkler head to a barrel, and different products are used depending on the shape and structure of the ceiling. Reducer specifications are divided into BSPT 1/2 “, 3/4”, 3/8 “and NPT 1/2”, 3/4 “and 3/8” according to the thread size of the spherical roller head. The ceiling is high and the larger the difference between the piping and the head, the larger the size is used, usually 110 ~ 140mm

M33 Reducer

Export piping Used for 25 pie unbraid piping, the standard is M33 * PT1 / 2 “(3/4”) 118mm. The center bracket is used for fastening the round, cap, and one-touch type.

M36 Reducer

Export piping Used for 26.8 pie / 28 pie braid piping, the standard is M36 * PT1 / 2 “(3/4”, 3/8) 118mm. The center bracket is used for fastening the round, cap, and one-touch type. The surface is galvanized and has a natural color (yellow).

Iron elbow

It is mounted on the high and low brackets for domestic apartment installation. It is made of 90 degree elbow type, so it is used for construction without anchor bar. Specification is PF1 “* PT 1/2 at 75mm, 60mm height

Elbow type Reducer

Used when pipe length is short and ceiling structure is narrow. The specification is 120 * 120mm 90 degree banding / PF1 “* PT 1/2, M33 * PT 1/2”, M36 * PT 1/2
  • REDUCER
Nipple
The nipple is used to connect the sprinkler flexible hose to the piping. The nipple is divided into a welding nipple that is pre-welded to the piping and then connects to the expansion / contraction pipe, a plain nipple to connect to the pipe screw, and a connection nipple to connect the expansion / contraction pipe to the expansion / contraction pipe.

Normal nipple

Normal nipple is for domestic use PF1 “* PT 1” 60mm nipple and for export M33 * PT1 “60mm, M36 * PT1” 63mm nipple are available. It is usually produced by combining with the back of the expansion pipe.

Welding Nipples

It is a nipple used after welding in piping and it is mainly used in domestic.

Connecting Nipples

It is used when connecting the expansion / contraction pipe and the expansion / contraction pipe. It is often used when the length of the expansion / contraction pipe is short.
The specifications are PF1 “* PF1” 60mm, M33 * M33 60mm, M36 * M36 63mm
  • NIPPLE

Welding nipple

Piping Welding nipple male thread is PF1 “, which is used to connect to the expansion pipe nut part.

Connecting nipple

Connecting nipple Piping Welding nipple male thread is PF1 “, which is used to connect to the expansion pipe nut part

Bottom-Up Reducer (for underground parking)

Size : (70mm, 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm, 500mm)

Assembly Sets
  • Support Assembly Sets.